Red Radish in 3.5% brine
5.0 days at 68 °F · pH target 3.60 · outside typical range
Brine calculator
For submerged vegetables (cucumbers, peppers, cauliflower, garlic scapes). Salt mass is expressed as a percentage of water mass — NCHFP convention.
1 L of water ≈ 1 kg. 3.5% brine = 35 g salt per litre.
About Red Radish
Small red globe radishes ferment quickly and tint the brine a vivid pink. Their high water content and thin skins mean they sour in under a week, developing a mellow, slightly fizzy bite far gentler than raw radish. A common quick component in mixed-vegetable ferments and Korean-style banchan.
Fermentation data
- Default salt
- 2.5%(you are viewing 3.5%)
- Salt range
- 2–3%
- Time at 68°F
- 5.0 days
- pH target
- 3.60
- Water content
- 95%
- Preferred styles
- brine pickle, lacto ferment, kimchi component
Note: 3.5% is outside the typical brine range for Red Radish (2–3%). The recommended default is 2.5%. View 2.5% brine + Red Radish.
Technique
Trim and halve or quarter larger radishes; leave small ones whole. Pack into a jar and cover with a 2.5% salt brine (25g salt per liter). Weigh below the brine and ferment 3-7 days at 65-72°F — taste from day 3. Refrigerate once pleasantly sour to keep the snap.
Brine notes at 3.5%
35g salt per 1L water. Traditional Katz/Guss-style deli half-sour. Tangy in 4 days at 68-70°F. Refrigerate immediately to hold at half-sour stage. Can also use for pepper ferments and other 1-week brines.
What a 3.5% brine does for Red Radish
A 3.5% brine is 35 g of salt in every litre of water. That salt pulls moisture out of the radish by osmosis and, more importantly, tilts the jar in favour of salt-tolerant Lactobacillusover the spoilage microbes that can't handle it. A stronger brine ferments more slowly, keeps the vegetable firmer and crunchier, and stores longer; a weaker one ferments faster and softer.
Safety: Safe pickle brine. 3.5% is the most common starting point for cucumbers and peppers. Target pH once soured: ~3.60 (below pH 4.6 is the fermented-vegetable safety threshold).
Brine recipe for a 1-litre jar
| Water | 1 L (1000 g) |
| Salt (3.5%) | 35 g |
| Red Radish, packed | ~650 g |
Dissolve the salt fully, cool the brine to room temperature, pack the radish, and pour over until submerged. Use the calculator above to scale to your exact jar or crock.
How long Red Radish takes at your kitchen temperature
Red Radish takes about 5 days in a 3.5% brine at the 68°F baseline. Fermentation speeds up as the room warms and slows as it cools — the days below are that baseline scaled by temperature:
| Kitchen temp | Approx. days | What to expect |
|---|---|---|
| 55°F (12.8°C) | 13.4 d | slow, clean |
| 60°F (15.6°C) | 9.6 d | classic range |
| 64°F (17.8°C) | 7 d | classic range |
| 68°F (20°C) | 5 d | baseline |
| 72°F (22.2°C) | 4 d | fast — check daily |
| 76°F (24.4°C) | 3.2 d | fast — check daily |
Temperature multipliers after the Noma Guide to Fermentation (pp. 53–57) and Katz, The Art of Fermentation (ch. 3). Below ~50°F ferments effectively stall; above ~82°F, mould and kahm yeast rise fast — taste and refrigerate early.
Red Radish in 3.5% brine — FAQ
How much salt do I need for a 3.5% brine?
Dissolve 35 g of non-iodised salt (fine sea or pickling salt) in every 1 litre (1000 g) of water — that is 3.5% by weight. For a partial jar, scale it with the calculator above; the ratio stays the same.
How long does Red Radish take in a 3.5% brine?
About 5 days at the 68°F baseline. It runs slower in a cool room (~9.6 days at 60°F) and faster when it's warm (~3.4 days at 75°F). Start tasting from day 7 and refrigerate once it's as sour as you like.
Is a 3.5% brine strong enough and safe?
Safe pickle brine. 3.5% is the most common starting point for cucumbers and peppers. As it ferments, radish should drop to about pH 3.60 — comfortably under pH 4.6, the acidity threshold the NCHFP and FDA treat as safe for fermented vegetables.
Why keep the radish under the brine?
Under the liquid the environment is oxygen-free, which is exactly what the Lactobacillus you want thrives in and what surface moulds and kahm yeast cannot tolerate. Anything poking above the brine is at risk — weigh the vegetables down so everything stays submerged.
Is cloudy brine or a white film normal?
Cloudy brine and a little sediment are normal signs of an active lacto-ferment. A thin, flat white film on the surface is usually kahm yeast — harmless; skim it off. Only fuzzy, raised, or blue/green/black growth is mould, in which case discard the batch.
Explore other brine concentrations for Red Radish
- 2.5% — lightly-salted vegetable brine
- 3% — standard half-sour brine
- 3.5% — NY deli half-sour (current)
- 5% — full-sour / long-ferment brine
- 6% — fish sauce / garum base
Sources
- NCHFP (UGA) — fermented brine-pickle method
- NCHFP (UGA) — Fermented and Pickled Products
- Linda Ziedrich, The Joy of Pickling (3rd ed., 2016)
For educational use only. Consult your local food safety authority for commercial production.
The kit for fermenting Red Radish
A short, honest kit for lacto-fermentation. The scale is the one that matters most — everything here is by weight.
- Digital kitchen scale (0.1 g)Salt % is by weight, not volume — a 0.1 g scale is what makes the math above accurate.View on Amazon →
- Glass fermentation weightsKeep vegetables submerged under the brine line so they ferment safely without mould.View on Amazon →
- Airlock fermentation lidsLet CO₂ escape while keeping oxygen out — wide-mouth lids that fit standard jars.View on Amazon →
- Wide-mouth mason jarsThe workhorse vessel for kraut, kimchi and brine pickles — 1 qt and ½ gal sizes.View on Amazon →
- Pickling / fine sea saltPure salt with no iodine or anti-caking agents, which can cloud brine and inhibit fermentation.View on Amazon →
- Stoneware fermentation crockFor scaling past the jar — a water-sealed crock for 5 L+ batches with built-in weights.View on Amazon →
As an Amazon Associate, Fermentcalc earns from qualifying purchases at no extra cost to you. More on how this is funded.